ESP-M1 ESP8285 Serial Port Long Distance Low Power Wireless WiFi Control Module
₹171.00
The ESP-M1 module core processor uses the cost-effective chip ESP8285. The chip integrates an enhanced version of Tensilica’s L106 Diamond Series 32-bit core processor in a smaller package with on-chip SRAM. ESP8285 has a complete of Wi-Fi mesh network capabilities, both to standalone application , or as a slave mounted on another host MCU running . When the ESP8285 hosts an application, it can be launched directly from external Flash . The built-in cache helps improve system performance and optimizes the storage system. In addition, the ESP8285 can be used as a Wi-Fi adapter via the SPI/SDIO interface or I2C/UART port for any microcontroller-based design.
Overview:
- ESP-M1 Wifi Module
- Working voltage 2.5V ~ 3.6V
- Working Average current: 80 mA
- Operating temperature range : -40 ° C -125 ° C
Features:
- Small Size
- Serial port to WiFi
- Wireless transparent transmission
- Ultra-low power consumption over long distances
- An external antenna can be used
- High temperature resistance up to 125 ° C
- Fully compatible with ESP8266, the source code can be used as it is
- module size : 12.3mm × 15mm (M1 version)
NOTE : ESP8285=ESP8266+1M Flash.
Compared to ESP8266, it can withstand temperatures up to 125 degrees Celsius.And the ESP8266 source program can be used as it is.
Compared to ESP8266, it can withstand temperatures up to 125 degrees Celsius.And the ESP8266 source program can be used as it is.
SOC characteristics:
- Built-in Tensilica L106 ultra-low power 32-bit microprocessor, supporting 80MHz and 160MHz at the main frequency, supporting RTOS
- Built-in TCP/IP protocol stack
- Built 1 channel 10 bit high precision ADC
- peripheral interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
- Deep sleep holding current is 10uA, shutdown current is less than 5uA
- Wake up, connect and pass packets within 2 ms
- Standby power consumption is less than 1.0mW (DTIM3)
- Built-in 1M byte SPI Flash
Wi-Fi features:
- Support 802.11 b/g/n/e/i
- Support Station, SoftAP, SoftAP+STA mode
- Support Wi-Fi Direct (P2P)
- Support hardware acceleration of CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC
- P2P discovery, P2P GO mode/GC mode and P2P power management
- WPA/PA2 PSK and WPS
- 802.11 i security features: pre-authentication and TSN
- Support 802.11n (2.4 GHz)
- 802.1h/RFC1042 frame encapsulation
- Seamless roaming support
- Support AT remote upgrade and cloud OTA upgrade
- Support Smart Config function (including Android and iOS devices)
Applications:
- Household appliances
- Home automation
- Smart sockets, smart lights
- Mesh network
- Baby monitor
- IP camera
- Sensor network
- Wearable electronics
- Security ID tag
- Wireless location awareness
- Wireless positioning system beacon
- Industrial wireless control
Package Includes:
- 1 x ESP-M1 ESP8285 Serial Port Long Distance Low Power Wireless WiFi Control Module
Reviews
There are no reviews yet.